Effect of Sand Content on the Filter Cake Properties and Removal during Drilling Maximum Reservoir Contact Wells in Sandstone Reservoir
DOI: 10.1115/1.4032121
Single stage filter cake removal of barite weighted water based drilling fluid
Evaluation of Barium Sulfate (Barite) Solubility Using Different Chelating Agents at a High Temperature
Toward a Complete Removal of Barite (Barium Sulfate BaSO 4 ) Scale Using Chelating Agents and Catalysts
Modeling of Filter Cake Composition in Maximum Reservoir Contact and Extended Reach Horizontal Wells in Sandstone Reservoirs
DOI: 10.1115/1.4035022
Impact of sand content on filter cake and invert emulsion drilling fluid properties in extended reach horizontal wells
Evaluation of using HEDTA chelating agent to clean up long horizontal heterogeneous sandstone wells without divergent
Evaluation of the Reaction Kinetics of Diethylenetriaminepentaacetic Acid Chelating Agent and a Converter with Barium Sulfate (Barite) Using a Rotating Disk Apparatus
Effect of arenite, calcareous, argillaceous, and ferruginous sandstone cuttings on filter cake and drilling fluid properties in horizontal wells
DOI: 10.1155/2019/1956715
Evaluation of secondary formation damage caused by the interaction of chelated barite with formation rocks during filter cake removal
Effect of perlite particles on the filtration properties of high-density barite weighted water-based drilling fluid
A simple NMR methodology for evaluating filter cake properties and drilling fluid-induced formation damage
Effect of Formation Cutting’s Mechanical Properties on Drilling Fluid Properties During Drilling Operations
Modified Two-Phase Titration Methods to Quantify Surfactant Concentrations in Chemical-Enhanced Oil Recovery Applications
DOI: 10.1002/jsde.12442
A calibration method for estimating mudcake thickness and porosity using NMR data
Complex barite filter cake removal using in-situ generated acids by thermochemicals
Effect of exposure time on the compressive strength and formation damage of sandstone while drilling horizontal wells
Applications of chelating agents in the upstream oil and gas industry: A review
Impact of Perlite on the Properties and Stability of Water-Based Mud in Elevated-Temperature Applications
Investigating the Alteration of Sandstone Pore System and Rock Features by Role of Weighting Materials
Effect of Perlite Particles on Barite Cement Properties
The impact of weighting materials on carbonate pore system and rock characteristics
DOI: 10.1002/cjce.24092
Evaluating drilling fluid infiltration in porous media – Comparing NMR, gravimetric, and X-ray CT scan methods
Effect of perlite particles on the properties of oil-well class G cement
Effect of Different Weighting Agents on Drilling Fluids and Filter Cake Properties in Sandstone Formations
Evaluation of formation damages during filter cake deposition and removal process: The effect of primary damage on secondary damage
The Role of Drilled Formation in Filter Cake Properties Utilizing Different Weighting Materials
Prevention of hematite settling using perlite in water-based drilling fluid
Vermiculite for enhancement of barite stability in water-based mud at elevated temperature
Minimizing the Barite Scale in Carbonate Formations during the Filter Cake Removal Process
Improving filter cake sealing properties for high-density ilmenite drilling fluid
Improving the filtration properties for manganese tetroxide mud utilizing perlite particles to drill wide-range permeability sandstone formation
Impact of Quartz/Argillaceous Sandstone and Siliceous/Kaolinitic Claystone Contamination of Drilling Fluid and Filter Cake Properties
DOI: 10.1155/2023/1093287
Innovative Applications of Red Mud: Converting an Environmental Challenge to a Drilling Asset
Primary Investigation of Barite-Weighted Water-Based Drilling Fluid Properties
Primary Investigation of Ilmenite Dosage Effect on the Water-Based Drilling Fluid Properties
DOI: 10.1115/1.4054886
Effect of Hematite Dosage on Water-Based Drilling Fluid and Filter Cake Properties
DOI: 10.1115/1.4055209
Performance of Perlite as viscosifier in manganese tetroxide water based-drilling fluid
Evaluating the corrosion index of DTPA at different conditions - key of improving the performance of chelating agents in field treatments
Effect of Qusaiba shale formation on high-pressure high-temperature drilling fluids properties
Understanding the complexity of secondary formation damage: Mechanism and detection strategies during filter cake removal process
Fine-Tuning Filter Cake Sealing Performance: The Role of Particle Size in Hematite Weighted Water-Based Drilling Fluid
Influence of perlite on the stability of filter cake in low-density drilling fluids system
The impact of particle size distribution of haematite-based drilling fluid on perlite functionality
DOI: 10.1002/cjce.25364
A systematic investigation of drilling fluid bulk relaxation impact on NMR interpretation for formation evaluation
Enhancing Filter Cake Sealing in Ilmenite-Based Drilling Fluids Using Perlite: Performance Across Varied Densities and Filtration Media
Repurposing steel byproducts for sustainable utilization as a novel weighting agent in drilling fluids
Damage Tendency of HCl-Based Solutions During Hematite-Based Filter-Cake Removal in Carbonate Formations
DOI: 10.2118/228408-PA
Efficient and formation-friendly removal of hematite filter cake using DTPA-based chelating solution
The Role of pH and Alkali Salts on Corrosion Indices of EDTA Solutions in Oilfield Applications
Optimizing drilling fluid rheology: The role of particle size distribution and advanced rheological modelling
DOI: 10.1002/cjce.70107